In the construction and maintenance industry, water is the number one enemy of structural longevity. Whether you are working on a new build or fixing a basement that is already taking on water, choosing a reliable mainstream waterproofing method is essential to protect the property's value.
At Adoration, we provide the professional-grade tools and chemicals needed for both stages of the waterproofing lifecycle: Preventative Protection (before a leak) and Remedial Repair (after a leak).
Part 1: Pre-Leakage Waterproofing – Building the First Line of Defense
When a house is first built or undergoing a major renovation, the goal is to create an impermeable barrier. The mainstream waterproofing method for new surfaces usually involves "brushing" or "spraying" specialized coatings.
1. Brushing and Roll-on Membranes
This is the traditional approach. Contractors use waterproofing rolls or thick liquid membranes applied with brushes and rollers. While effective for small areas, it can be labor-intensive and prone to human error at the seams.
2. Spray-Applied Polyurea and Polyurethane
For a more modern and durable finish, professionals are shifting toward spray-applied solutions. Polyurea and Polyurethane offer incredible elasticity and a seamless finish that moves with the building.
-
The Equipment: To apply these effectively, you need consistent pressure. The Adoration High-Pressure Sprayer is built for high-volume application, while the Adoration DN-999 Dual Injection Pump (1:1) is the perfect partner for dual-component materials that require precise mixing at the nozzle to ensure the chemical bond is perfect.
Part 2: Post-Leakage Waterproofing – How to Stop Active Leaks
If the initial barrier fails, you need a reactive mainstream waterproofing method to stop the water in its tracks. Depending on the severity of the crack, there are two ways to use Adoration OPU-600 Polyurethane Injection Foam.
Method A: Surface Application (Pour/Brush)
For minor seepage or horizontal gaps where pressure isn't an option, you can pour or brush Adoration OPU-600 directly into the void. It will react with the moisture and expand to fill the gap. However, for a permanent, professional-grade fix, injection is the better choice.
Method B: The Superior Choice – High-Pressure OPU-600 Injection
Injecting polyurethane is the most effective mainstream waterproofing method for active leaks because it fills the crack from the inside out, creating a deep-seated rubberized seal.
Professional Injection Steps:
-
Preparation: The crack must be sound and free of dust, oil, or any loose particles to ensure the foam bonds correctly.
-
Drilling: Ensure the surface is dry. Drill 1/2" or 3/8" holes at a 45° angle toward the center of the crack. Space these holes approximately 6-12 inches apart.
-
Setting the Packer: Insert the Adoration S-10 Instant Packer. Withdraw the needle to the working depth groove, stop there, and tighten until the seal is completely airtight.
-
Leak Check & Setup: Fill your pump with OPU-600 Polyurethane, connect the hose, and always begin injecting from the lowest point of the crack.
-
The Injection Process: Inject steadily until the material appears at the next packer or begins to bleed out of the crack.
-
Clean Up: A major advantage of using Adoration S-10 Instant Packers is that they need no curing time. You can break them off as soon as all injections are finished on the same day, saving you a second trip to the job site.
Conclusion: Quality Tools for Quality Waterproofing
Whether you are spraying a new foundation or injecting a leaking crack, the success of any mainstream waterproofing method depends on the quality of the equipment and the chemicals used.
Adoration provides the full ecosystem—from the DN-999 Dual Pump for prep to the OPU-600 Foam and S-10 Instant Packers for the final fix.
0 comments